Datasheets»Tyco Electronics (renamed to TE Connectivity)»021174-000 Datasheet #3

021174-000 Datasheet - Page 581

Download or read online Tyco Electronics 021174-000 Cable Accessories Solder Sleeve Shield Terminator Polyvinylidene Fluoride Transparent Blue pdf datasheet.
Also see for 021174-000: Datasheet #1 (1 page)  •  Datasheet #2 (1 page)  •  Datasheet #4 (1 page)



Page
581 of 637
prevnext
Miscellaneous
Fiber Optic Cables
Table of Requirements and
Results from Def Stan 60 – 1
Part 2
Definition
Requirements
Cable tensile
<0.5% cable elongation no increase in attenuation at
strength
full load and after test compared to pre-test value.
No cracking or deformation of cable sheath.
Cable bend
<0.5dB change after test.
No cracking or deformation of cable sheath.
Cold bend
<0.5dB change after test.
No cracking or deformation of cable sheath.
Cyclic bend
<0.5dB change after test.
No cracking or deformation of cable sheath.
Cable impact
<0.5dB change after test.
No cracking or deformation of cable sheath.
<0.5dB change after test <20% reduction
Cable crush
from original diameter.
No cracking or deformation of cable sheath.
Cable snatch
<0.5dB change after test <20% reduction
from original diameter.
≥ 25N
Dynamic cut through
Tear resistance
5 N/mm
Shrinkage
<3mm total
Scrape abrasion
500 cycles minimum
Volume
25
TS ret
swell
15
min %
max %
15
Fluids
10
50
10
10
<20% change in TS/Eb/tear between 14 and 28 days.
Accelerated ageing
Eb ≥ 150%
Arrhenius plot
40,000 hours at 85°C
Stability
175% max. elongation, 25% max. permanent elongation.
Pressure
Indentation not to exceed 50%.
Ozone
No cracks with normal vision.
≤ 80% Eb change, ≤ 20% TS change.
UV light resistance
Smoke Index
20 maximum
Toxicity index
5 maximum
Halogen index
No detectable halogens.
Oxygen index
29 minimum
Temperature index
250°C minimum
Flammability
Not to reach within 50 mm of the lower clamp.
Catalog 1654025
Dimensions are in millimeters
Revised 12-04
and inches unless otherwise
specified. Values in brackets
www.tycoelectronics.com
are U.S. equivalents.
(Continued)
1000N applied at 100N/minute
20N load, 10 cycles of wind and unwind. 6 wraps.
20N load, 10 cycles of wind and unwind. 6 wraps, -30°C.
40N, 1000 cycles.
12.5 mm radius, 1kg hammer, 100 mm height
100 impacts.
2000N/5 min
1kg, 10 cycles
85°C, 60N/minute, 0.45mm diameter needle blade
16 hrs at -30°C and 16 hrs at 85°C
5N, 85°C, 0.45 mm diameter needle blade
60
Eb ret
60
Diesel F76
60
min %
60
OX-30
60
60
OX-40 HS200X
60
60
OMD-113
50
50
OX-28
80
80
Deionized water
80
80
Deionized water + 3.5% NaCI
110°C for 14 and 28 days.
End point measurement: 50% absolute elongation
105°C, 0.2N/mm2 stress.
85°C for 4 hrs.
80 – 100ppm for 120 hrs
8 hrs UV 55°C, 4 hrs humidity 40°C, (UV-B) 1000 hrs.
NES 711
NES 713
Sodium fusion test (Lassaigne)
BS 2782 Part 1 Method 141D
Nes 715
BS 4066 Part 1
Dimensions are shown for
USA: 1-800-522-6752
reference purposes only.
Canada: 1-905-470-4425
Specifications subject
Mexico: 01-800-733-8926
to change.
C. America: 52-55-5-729-0425
Part 2
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
28 days @ 20°C
Pass
28 days @ 50°C
Pass
28 days @ 50°C
Pass
28 days @ 50°C
Pass
28 days @ 50°C
Pass
28 days @ 50°C
Pass
28 days @ 50°C
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
9-99
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
9
Specifications of Tyco Electronics 021174-000
ID_COMPONENTS:
65836
Series:
*
Type:
Solder Sleeve Shield Terminator
Other Names:
7-1190164-4, SO63-2-55-22-90

Comments to this Datasheet