Datasheets»Maxim Integrated»DS1886_V1 Datasheet

DS1886_V1 Datasheet - Page 64

Download or read online Maxim Integrated DS1886_V1 SFP and PON ONU Controller with Digital LDD Interface pdf datasheet.



Page
64 of 92
prevnext
A2h Table 02h, Register 89h: CNFGA
FACTORY DEFAULT
READ ACCESS
WRITE ACCESS
MEMORY TYPE
89h
LOSC
RESERVED
BIT 7
LOSC: Enables LOSOUT due to input pin LOS.
BIT 7
0 = LOSOUT is affected by the LOS input.
1 = LOSOUT is not affected by changed in the LOS input.
BIT 6
RESERVED
INV LOS: Inverts the buffered input pin LOS to output pin LOSOUT.
BIT 5
0 = Noninverted LOS to LOSOUT pin.
1 = Inverted LOS to LOSOUT pin.
BIT 4
RESERVED
MASK:
0 = Alarm enable row exists at A2h Table 01h, Registers F8h–FFh. A2h Table 05h, Registers F8h–
BIT 3
FFh are empty.
1 = Alarm enable row exists at A2h Table 05h, Registers F8h–FFh. A2h Table 01h, Registers F8h–
FFh are empty.
BIT 2
RESERVED
BURST_MODE:
0 = TXP is derived from the TXMON input.
BIT 1
1 = TXP is calculated from MD0 and MD1, which are read from the MAX3710 through the 3-wire
interface.
INVTXFI: Allow for inversion of signal driven by TXF input pin.
BIT 0
0 = (Default) TXF signal is not inverted.
1 = TXF signal is inverted.
SFP and PON ONU Controller
with Digital LDD Interface
82h
PW2 or (PW1 and RWTBL246) or (PW1 and RBL246)
PW2 or (PW1 and RWTBL246)
Nonvolatile (SEE)
INV LOS
RESERVED
MASK
DS1886
RESERVED
BURST_MODE
INVTXFI
BIT 0
64

Comments to this Datasheet