Datasheets»Maxim Integrated»DS1402D-0XX Datasheet

DS1402D-0XX Datasheet

Download or read online Maxim Integrated DS1402D-0XX iButton Probe Component Parts pdf datasheet.



Page
1 of 6
next
www.maxim-ic.com
Features
®
§
Spring-Mounted iButton
Reader
§
Momentary Contact for Both F3 and F5 Style
iButtons or Dwelled Contact for F5 Only
§
Convenient Tactile Feedback System for Dwelled
iButton Contact
General Description
The four component parts that are used to construct the Blue-Dotä iButton reader found in the DS1402D-DR8 and
DS1402D-DB8 are described here. Diagrams 1 through 4 show the individual part dimensions. This document also
describes how to assemble the Blue-Dot given the sub-parts listed in Table 1. The Blue-Dot can be assembled in
the three easy steps described in the Assembly Instructions section.
Table 1. DS1402D Parts Listing
Reference
Part
A
DS1402D-011
B
DS1402D-010
C
DS1402D-003
D
DS1402D-017
DS1402D-041
iButton is a registered trademark of Dallas Semiconductor.
Blue-Dot is a trademark of Dallas Semiconductor.
Mounting Pad Layout
Ground
.080in
Description
Small Blue Insert
Small Data Contact Spring
Large Blue Support
Large Ground Contact
Subassembly of A-D
1 of 6
DS1402D-0XX
iButton Probe Component Parts
.82in
Data
.46in
Ordering Information
DS1402D-11
DS1402D-10
DS1402D-3
DS1402D-17
DS1402D-41
081304

Summary of Contents

Page 1

... Blue-Dot is a trademark of Dallas Semiconductor. Mounting Pad Layout Ground .080in Description Small Blue Insert Small Data Contact Spring Large Blue Support Large Ground Contact Subassembly of A DS1402D-0XX iButton Probe Component Parts .82in Data .46in Ordering Information DS1402D-11 DS1402D-10 DS1402D-3 DS1402D-17 DS1402D-41 ...

Page 2

... Diagram 1. DS1402D-003 Diagram 2. DS1402D-010 ...

Page 3

... Diagram 3. DS1402D-011 Diagram 4. DS1402D-017 ...

Page 4

Assembly Instructions 1. Insert the end of the Data Spring (B) wire at the large coil end, into the slot at the top of the Data Button (A). Twist the spring clockwise into the slot until the end of the ...

Page 5

Compress the Data Spring (B) into the center of the Data Button (A) and slide the Contact (D) onto the Contact Support (C). Check that the Data Button (A) is free to move up and down through the Contact ...

Page 6

Overview Here is an assembly picture of the overview of steps listed above. D See Assembly Instructions A Option: Can be twisted in at the last step of assembly Insert into Contact D Assembled Parts ...

Comments to this Datasheet