Datasheets»Panasonic Corporation»AXA3102122P Datasheet

AXA3102122P Datasheet

Download or read online Panasonic Corporation AXA3102122P PCB CONNECTOR pdf datasheet.



Page
1 of 3
next
(AXA3)
PRODUCT TYPES
Part name
Mounting type
Connector for
Standard type
SIM card
SPECIFICATIONS
1. Characteristics
Item
Rated current
Rated voltage
Insulation resistance
Electrical
characteristics
Breakdown voltage
Contact resistance
Contact force
Mechanical
characteristics
Terminal holding force
Ambient temperature
Storage tempearture
Environmental
characteristics
Thermal shock
resistance
Mechanical lifetime
Soldering heat resistance
Cream solder printing
2. Materials and surface treatment
Part name
Resin-molding portion
Contact
112
LOW-PROFILE,
SPACE-SAVING,
LEAD-FREE CONNECTOR
FOR SIM CARDS
FEATURES
1. Insert molding employed to achieve
a low-profile 0.5 mm thick design.
2. Being lead-free makes it
environmentally friendly.
3. Approximately 30% space savings
achieved compared to previous
product of other company.
Eject type
Card detection
No. of contacts
None
6
Specifications
Standard type
0.5A
30V AC/DC
Min. 1,000MΩ
500V AC for 1 minute
Max.60mΩ
0.294N to 0.588N/contacts
{30gf to 60gf}
Min. 0.981N/contacts {100gf}
–55°C to +85°C
The allowable storage temperature is –40°C to
+50°C if unopened from original packaging
5 cycles,
insulation resistance: Min.100MΩ
contact resistance: Max.60mΩ
5000 times, contact resistance Max.120mΩ
Satisfies electrical and mechanical initial
characteristics.
Satisfies electrical and mechanical initial
characteristics.
Material
Heat resistant resin (UL94V-0), Color: black
Copper alloy
CONNECTOR
FOR SIM CARD
APPLICATIONS
1. GSM type mobile phones
2. Next-generation cellular phones,
starting with W-CDMA models, that
conform to IMT2,000.
Packing quantity
Part No.
Inner carton
(1 reel)
AXA3102122P
3,000 pcs.
Conditions
Using 500V DC megger (applied for 1 min.)
Rated voltage is applied for one minute and check for
short circuit or damage with a detection current of 1mA.
Measured based on the HP4338B measurement method
of JIS C 5402.
Measured at the card set position.
(Card set position: Front of molded portion)
Measured with terminals pulled.
No freezing at low temperature
No freezing at low temperature
Perform five cycles of steps 1 to 4 in sequence.
Step
0
1. –55 , 30 minutes
−3
+10
2. 25 , Max. 5 minutes
−5
+3
3. 85 , 30 minutes
0
+10
4. 25 , Max. 5 minutes
−5
Do not press the contact in further than the surface of the
molded portion of the connector.
Infrared reflow soldering:
Peak temperature Max. 245°C
(The temperature of the of PC board surface adjacent to
connector terminals.)
Soldering iron: 300°C max. 5 sec.
350°C max. 3 sec.
Recommended value: t = 0.12 thick screen
Surface treatment
Contact portion: Au plating over Ni
Soldering terminal portion: Au plating over Ni
(except for top of the terminal)
Outer carton
6,000 pcs.
Specifications of Panasonic Corporation AXA3102122P
Lead Free:
Yes
EU RoHS Compliant:
Yes
Option:
GENERAL PURPOSE
Contact Material:
COPPER ALLOY
Manufacturer Series:
AXA
Contact Finish - Mating:
GOLD OVER NICKEL
Contact Finish - Termination:
GOLD OVER NICKEL
Connection Type:
PCB CONNECTOR

Summary of Contents

Page 1

... W-CDMA models, that conform to IMT2,000. Packing quantity Part No. Inner carton (1 reel) AXA3102122P 3,000 pcs. Conditions Using 500V DC megger (applied for 1 min.) Rated voltage is applied for one minute and check for short circuit or damage with a detection current of 1mA. Measured based on the HP4338B measurement method of JIS C 5402 ...

Page 2

DIMENSIONS EMBOSSED TAPE AND REEL Tape dimensions 32.0±0.3 28.4 (1.75) 14.2 Top cover Connector for SIM card 1.10 10.00 0.70±0.1 2.54±0.1 (pitch) 5.08±0.1 0.50±0.1 Terminal coplanarity 0.1 Reel dimensions 2 (32 tape Emboss carrier tape mm ...

Page 3

NOTES 1. Regarding the design of PC board patterns Conduct the recommended foot pattern design, in order to preserve the mechanical strength of terminal solder areas. 2. Regarding the connector mounting If the chuck holding strength on the device ...

Comments to this Datasheet